print edge -> face

engine/physics/src/body.rs

@@ -33,7 +33,7 @@ impl<T:Copy> std::ops::Neg for &Body<T>{
 impl<T> Body<T>
 	where Time<T>:Copy,
 {
-	pub const ZERO:Self=Self::new(vec3::ZERO,vec3::ZERO,vec3::ZERO,Time::ZERO);
+	pub const ZERO:Self=Self::new(vec3::zero(),vec3::zero(),vec3::zero(),Time::ZERO);
 	pub const fn new(position:Planar64Vec3,velocity:Planar64Vec3,acceleration:Planar64Vec3,time:Time<T>)->Self{
 		Self{
 			position,
@@ -107,8 +107,8 @@ impl<T> Body<T>
 		self.time+=dt.into();
 	}
 	pub fn infinity_dir(&self)->Option<Planar64Vec3>{
-		if self.velocity==vec3::ZERO{
-			if self.acceleration==vec3::ZERO{
+		if self.velocity==vec3::zero(){
+			if self.acceleration==vec3::zero(){
 				None
 			}else{
 				Some(self.acceleration)

engine/physics/src/face_crawler.rs

@@ -74,13 +74,13 @@ impl<F:Copy,M:MeshQuery<Normal=Vector3<F>,Offset=Fixed<4,128>>> FEV<M>
 	where
 		// This is hardcoded for MinkowskiMesh lol
 		M::Face:Copy,
-		M::Edge:Copy,
-		M::Vert:Copy,
+		M::Edge:Copy+core::fmt::Debug,
+		M::Vert:Copy+core::fmt::Debug,
 		F:core::ops::Mul<Fixed<1,32>,Output=Fixed<4,128>>,
 		<F as core::ops::Mul<Fixed<1,32>>>::Output:core::iter::Sum,
 		M::Offset:core::ops::Sub<<F as std::ops::Mul<Fixed<1,32>>>::Output>,
 {
-	fn next_transition(&self,mesh:&M,body:&Body,lower_bound:Bound<GigaTime>,mut upper_bound:Bound<GigaTime>)->Transition<M>{
+	fn next_transition<const ENABLE_DEBUG:bool>(&self,mesh:&M,body:&Body,lower_bound:Bound<GigaTime>,mut upper_bound:Bound<GigaTime>)->Transition<M>{
 		//conflicting derivative means it crosses in the wrong direction.
 		//if the transition time is equal to an already tested transition, do not replace the current best.
 		let mut best_transition=Transition::Miss;
@@ -132,6 +132,9 @@ impl<F:Copy,M:MeshQuery<Normal=Vector3<F>,Offset=Fixed<4,128>>> FEV<M>
 					//wrap for speed
 					for dt in Fixed::<4,128>::zeroes2(n.dot(delta_pos).wrap_4(),n.dot(body.velocity).wrap_4()*2,n.dot(body.acceleration).wrap_4()){
 						if low(&lower_bound,&dt)&&upp(&dt,&upper_bound)&&n.dot(body.extrapolated_velocity_ratio_dt(dt)).is_negative(){
+							if ENABLE_DEBUG{
+								println!("Face Crawler FEV::Edge({edge_id:?}) -> FEV::Face");
+							}
 							upper_bound=Bound::Included(dt);
 							best_transition=Transition::Next(FEV::Face(edge_face_id),dt);
 							break;
@@ -160,6 +163,9 @@ impl<F:Copy,M:MeshQuery<Normal=Vector3<F>,Offset=Fixed<4,128>>> FEV<M>
 					let n=-mesh.directed_edge_n(directed_edge_id);
 					for dt in Fixed::<2,64>::zeroes2((n.dot(body.position-mesh.vert(vert_id)))*2,n.dot(body.velocity)*2,n.dot(body.acceleration)){
 						if low(&lower_bound,&dt)&&upp(&dt,&upper_bound)&&n.dot(body.extrapolated_velocity_ratio_dt(dt)).is_negative(){
+							if ENABLE_DEBUG{
+								println!("Face Crawler FEV::Vert({vert_id:?}) -> FEV::Edge");
+							}
 							let dt=Ratio::new(dt.num.widen_4(),dt.den.widen_4());
 							upper_bound=Bound::Included(dt);
 							best_transition=Transition::Next(FEV::Edge(directed_edge_id.as_undirected()),dt);
@@ -172,11 +178,11 @@ impl<F:Copy,M:MeshQuery<Normal=Vector3<F>,Offset=Fixed<4,128>>> FEV<M>
 		}
 		best_transition
 	}
-	pub fn crawl(mut self,mesh:&M,relative_body:&Body,lower_bound:Bound<&Time>,upper_bound:Bound<&Time>)->CrawlResult<M>{
+	pub fn crawl<const ENABLE_DEBUG:bool>(mut self,mesh:&M,relative_body:&Body,lower_bound:Bound<&Time>,upper_bound:Bound<&Time>)->CrawlResult<M>{
 		let mut lower_bound=lower_bound.map(|&t|into_giga_time(t,relative_body.time));
 		let upper_bound=upper_bound.map(|&t|into_giga_time(t,relative_body.time));
 		for _ in 0..20{
-			match self.next_transition(mesh,relative_body,lower_bound,upper_bound){
+			match self.next_transition::<ENABLE_DEBUG>(mesh,relative_body,lower_bound,upper_bound){
 				Transition::Miss=>return CrawlResult::Miss(self),
 				Transition::Next(next_fev,next_time)=>(self,lower_bound)=(next_fev,Bound::Included(next_time)),
 				Transition::Hit(face,time)=>return CrawlResult::Hit(face,time),

engine/physics/src/model.rs

@@ -90,6 +90,9 @@ pub trait MeshQuery{
 		let &[v0,v1]=self.edge_verts(directed_edge_id.as_undirected()).as_ref();
 		(self.vert(v1)-self.vert(v0))*((directed_edge_id.parity() as i64)*2-1)
 	}
+	/// This must return a point inside the mesh.
+	#[expect(dead_code)]
+	fn hint_point(&self)->Planar64Vec3;
 	fn vert(&self,vert_id:Self::Vert)->Planar64Vec3;
 	fn face_nd(&self,face_id:Self::Face)->(Self::Normal,Self::Offset);
 	fn face_edges(&self,face_id:Self::Face)->impl AsRef<[Self::Edge]>;
@@ -100,17 +103,21 @@ pub trait MeshQuery{
 }
 #[derive(Debug)]
 struct FaceRefs{
+	// I didn't write it down, but I assume the edges are directed
+	// clockwise when looking towards the face normal, i.e. right hand rule.
 	edges:Vec<SubmeshDirectedEdgeId>,
+	//verts are redundant, use edge[i].verts[0]
 	//verts:Vec<VertId>,
 }
 #[derive(Debug)]
 struct EdgeRefs{
 	faces:[SubmeshFaceId;2],//left, right
-	verts:[SubmeshVertId;2],//bottom, top
+	verts:[SubmeshVertId;2],//start, end
 }
 #[derive(Debug)]
 struct VertRefs{
 	faces:Vec<SubmeshFaceId>,
+	// edges are always directed away from the vert
 	edges:Vec<SubmeshDirectedEdgeId>,
 }
 #[derive(Debug)]
@@ -447,6 +454,10 @@ impl MeshQuery for PhysicsMeshView<'_>{
 		let face_idx=self.topology.faces[face_id.get() as usize].get() as usize;
 		(self.data.faces[face_idx].normal,self.data.faces[face_idx].dot)
 	}
+	fn hint_point(&self)->Planar64Vec3{
+		// invariant: meshes always encompass the origin
+		vec3::zero()
+	}
 	//ideally I never calculate the vertex position, but I have to for the graphical meshes...
 	fn vert(&self,vert_id:SubmeshVertId)->Planar64Vec3{
 		let vert_idx=self.topology.verts[vert_id.get() as usize].get() as usize;
@@ -532,6 +543,9 @@ impl MeshQuery for TransformedMesh<'_>{
 		// wrap for speed
 		self.transform.vertex.transform_point3(self.view.vert(vert_id)).wrap_1()
 	}
+	fn hint_point(&self)->Planar64Vec3{
+		self.transform.vertex.translation
+	}
 	#[inline]
 	fn face_edges(&self,face_id:SubmeshFaceId)->impl AsRef<[SubmeshDirectedEdgeId]>{
 		self.view.face_edges(face_id)
@@ -750,15 +764,15 @@ impl MinkowskiMesh<'_>{
 			let infinity_fev=self.infinity_fev(-dir,infinity_body.position);
 			//a line is simpler to solve than a parabola
 			infinity_body.velocity=dir;
-			infinity_body.acceleration=vec3::ZERO;
+			infinity_body.acceleration=vec3::zero();
 			//crawl in from negative infinity along a tangent line to get the closest fev
-			infinity_fev.crawl(self,&infinity_body,Bound::Unbounded,start_time).miss()
+			infinity_fev.crawl::<false>(self,&infinity_body,Bound::Unbounded,start_time).miss()
 		})
 	}
 	pub fn predict_collision_in(&self,relative_body:&Body,range:impl RangeBounds<Time>)->Option<(MinkowskiFace,GigaTime)>{
 		self.closest_fev_not_inside(*relative_body,range.start_bound()).and_then(|fev|{
 			//continue forwards along the body parabola
-			fev.crawl(self,relative_body,range.start_bound(),range.end_bound()).hit()
+			fev.crawl::<true>(self,relative_body,range.start_bound(),range.end_bound()).hit()
 		})
 	}
 	pub fn predict_collision_out(&self,relative_body:&Body,range:impl RangeBounds<Time>)->Option<(MinkowskiFace,GigaTime)>{
@@ -768,7 +782,7 @@ impl MinkowskiMesh<'_>{
 		let infinity_body=-relative_body;
 		self.closest_fev_not_inside(infinity_body,lower_bound.as_ref()).and_then(|fev|{
 			//continue backwards along the body parabola
-			fev.crawl(self,&infinity_body,lower_bound.as_ref(),upper_bound.as_ref()).hit()
+			fev.crawl::<true>(self,&infinity_body,lower_bound.as_ref(),upper_bound.as_ref()).hit()
 				//no need to test -time<time_limit because of the first step
 				.map(|(face,time)|(face,-time))
 		})
@@ -804,10 +818,10 @@ impl MinkowskiMesh<'_>{
 	fn infinity_in(&self,infinity_body:Body)->Option<(MinkowskiFace,GigaTime)>{
 		let infinity_fev=self.infinity_fev(-infinity_body.velocity,infinity_body.position);
 		// Bound::Included means that the surface of the mesh is included in the mesh
-		infinity_fev.crawl(self,&infinity_body,Bound::Unbounded,Bound::Included(&infinity_body.time)).hit()
+		infinity_fev.crawl::<false>(self,&infinity_body,Bound::Unbounded,Bound::Included(&infinity_body.time)).hit()
 	}
 	pub fn is_point_in_mesh(&self,point:Planar64Vec3)->bool{
-		let infinity_body=Body::new(point,vec3::Y,vec3::ZERO,Time::ZERO);
+		let infinity_body=Body::new(point,vec3::Y,vec3::zero(),Time::ZERO);
 		//movement must escape the mesh forwards and backwards in time,
 		//otherwise the point is not inside the mesh
 		self.infinity_in(infinity_body)
@@ -853,6 +867,10 @@ impl MeshQuery for MinkowskiMesh<'_>{
 			},
 		}
 	}
+	fn hint_point(&self)->Planar64Vec3{
+		self.mesh1.transform.vertex.translation-
+		self.mesh0.transform.vertex.translation
+	}
 	fn face_edges(&self,face_id:MinkowskiFace)->impl AsRef<[MinkowskiDirectedEdge]>{
 		match face_id{
 			MinkowskiFace::VertFace(v0,f1)=>{

engine/physics/src/physics.rs

@@ -113,11 +113,11 @@ struct ContactMoveState{
 }
 impl TransientAcceleration{
 	fn with_target_diff(target_diff:Planar64Vec3,accel:Planar64,time:Time)->Self{
-		if target_diff==vec3::ZERO{
+		if target_diff==vec3::zero(){
 			TransientAcceleration::Reached
 		}else if accel==Planar64::ZERO{
 			TransientAcceleration::Unreachable{
-				acceleration:vec3::ZERO
+				acceleration:vec3::zero()
 			}
 		}else{
 			//normal friction acceleration is clippedAcceleration.dot(normal)*friction
@@ -140,7 +140,7 @@ impl TransientAcceleration{
 	}
 	fn acceleration(&self)->Planar64Vec3{
 		match self{
-			TransientAcceleration::Reached=>vec3::ZERO,
+			TransientAcceleration::Reached=>vec3::zero(),
 			&TransientAcceleration::Reachable{acceleration,time:_}=>acceleration,
 			&TransientAcceleration::Unreachable{acceleration}=>acceleration,
 		}
@@ -443,7 +443,7 @@ impl StyleHelper for StyleModifiers{
 
 	fn get_control_dir(&self,controls:Controls)->Planar64Vec3{
 		//don't get fancy just do it
-		let mut control_dir:Planar64Vec3=vec3::ZERO;
+		let mut control_dir:Planar64Vec3=vec3::zero();
 		//Apply mask after held check so you can require non-allowed keys to be held for some reason
 		let controls=controls.intersection(self.controls_mask);
 		if controls.contains(Controls::MoveForward){
@@ -482,7 +482,7 @@ impl StyleHelper for StyleModifiers{
 		};
 		let transform=integer::Planar64Affine3::new(
 			mat3::from_diagonal(self.hitbox.halfsize),
-			vec3::ZERO
+			vec3::zero()
 		);
 		HitboxMesh::new(mesh,transform)
 	}
@@ -500,7 +500,7 @@ impl MoveState{
 	//call this after state.move_state is changed
 	fn apply_enum(&self,body:&mut Body,touching:&TouchingState,models:&PhysicsModels,hitbox_mesh:&HitboxMesh,style:&StyleModifiers,camera:&PhysicsCamera,input_state:&InputState){
 		match self{
-			MoveState::Fly=>body.acceleration=vec3::ZERO,
+			MoveState::Fly=>body.acceleration=vec3::zero(),
 			MoveState::Air=>{
 				//calculate base acceleration
 				let a=touching.base_acceleration(models,style,camera,input_state);
@@ -614,7 +614,7 @@ impl MoveState{
 			// TODO: unduplicate this code
 			match self.get_walk_state(){
 				// did you stop touching the thing you were walking on?
-				Some(walk_state)=>if !touching.contacts.contains_key(&walk_state.contact.convex_mesh_id){
+				Some(walk_state)=>if !touching.contains_contact(&walk_state.contact.convex_mesh_id){
 					self.set_move_state(MoveState::Air,body,touching,models,hitbox_mesh,style,camera,input_state);
 				}else{
 					// stopped touching something else while walking
@@ -753,6 +753,8 @@ impl Collision{
 }
 #[derive(Clone,Debug,Default)]
 struct TouchingState{
+	// This is kind of jank, it's a ContactCollision
+	// but split over the Key and Value of the HashMap.
 	contacts:HashMap<ConvexMeshId<ContactModelId>,model_physics::MinkowskiFace>,
 	intersects:HashSet<ConvexMeshId<IntersectModelId>>,
 }
@@ -773,10 +775,16 @@ impl TouchingState{
 	fn remove_intersect(&mut self,convex_mesh_id:&ConvexMeshId<IntersectModelId>)->bool{
 		self.intersects.remove(convex_mesh_id)
 	}
+	fn contains_contact(&self,convex_mesh_id:&ConvexMeshId<ContactModelId>)->bool{
+		self.contacts.contains_key(convex_mesh_id)
+	}
+	fn contains_intersect(&self,convex_mesh_id:&ConvexMeshId<IntersectModelId>)->bool{
+		self.intersects.contains(convex_mesh_id)
+	}
 	fn contains(&self,convex_mesh_id:&ConvexMeshId<PhysicsModelId>)->bool{
 		match convex_mesh_id.model_id{
-			PhysicsModelId::Contact(contact_model_id)=>self.contacts.contains_key(&convex_mesh_id.map(contact_model_id)),
-			PhysicsModelId::Intersect(intersect_model_id)=>self.intersects.contains(&convex_mesh_id.map(intersect_model_id)),
+			PhysicsModelId::Contact(contact_model_id)=>self.contains_contact(&convex_mesh_id.map(contact_model_id)),
+			PhysicsModelId::Intersect(intersect_model_id)=>self.contains_intersect(&convex_mesh_id.map(intersect_model_id)),
 		}
 	}
 	fn base_acceleration(&self,models:&PhysicsModels,style:&StyleModifiers,camera:&PhysicsCamera,input_state:&InputState)->Planar64Vec3{
@@ -802,7 +810,7 @@ impl TouchingState{
 		let contacts:Vec<_>=self.contacts.iter().map(|(convex_mesh_id,face_id)|{
 			let n=contact_normal(models,hitbox_mesh,convex_mesh_id,*face_id);
 			crate::push_solve::Contact{
-				position:vec3::ZERO,
+				position:vec3::zero(),
 				velocity:n,
 				normal:n,
 			}
@@ -813,7 +821,7 @@ impl TouchingState{
 		let contacts:Vec<_>=self.contacts.iter().map(|(convex_mesh_id,face_id)|{
 			let n=contact_normal(models,hitbox_mesh,convex_mesh_id,*face_id);
 			crate::push_solve::Contact{
-				position:vec3::ZERO,
+				position:vec3::zero(),
 				velocity:n,
 				normal:n,
 			}
@@ -1564,7 +1572,7 @@ fn collision_start_contact(
 				//kill v
 				//actually you could do this with a booster attribute :thinking:
 				//it's a little bit different because maybe you want to chain ladders together
-				set_velocity(body,touching,models,hitbox_mesh,vec3::ZERO);//model.velocity
+				set_velocity(body,touching,models,hitbox_mesh,vec3::zero());//model.velocity
 			}
 			//ladder walkstate
 			let (gravity,target_velocity)=ladder_things(ladder_settings,&contact,touching,models,hitbox_mesh,style,camera,input_state);
@@ -1791,7 +1799,7 @@ fn atomic_internal_instruction(state:&mut PhysicsState,data:&PhysicsData,ins:Tim
 					if strafe_settings.activates(controls){
 						let masked_controls=strafe_settings.mask(controls);
 						let control_dir=state.style.get_control_dir(masked_controls);
-						if control_dir!=vec3::ZERO{
+						if control_dir!=vec3::zero(){
 							let camera_mat=state.camera.simulate_move_rotation_y(state.input_state.lerp_delta(state.time).x);
 							if let Some(ticked_velocity)=strafe_settings.tick_velocity(state.body.velocity,(camera_mat*control_dir).with_length(Planar64::ONE).divide().wrap_1()){
 								//this is wrong but will work ig
@@ -1814,7 +1822,7 @@ fn atomic_internal_instruction(state:&mut PhysicsState,data:&PhysicsData,ins:Tim
 						//which means that gravity can be fully cancelled
 						//ignore moving platforms for now
 						let target=core::mem::replace(&mut walk_state.target,TransientAcceleration::Reached);
-						set_acceleration(&mut state.body,&state.touching,&data.models,&data.hitbox_mesh,vec3::ZERO);
+						set_acceleration(&mut state.body,&state.touching,&data.models,&data.hitbox_mesh,vec3::zero());
 						// check what the target was to see if it was invalid
 						match target{
 							//you are not supposed to reach a walk target which is already reached!
@@ -1896,7 +1904,7 @@ fn atomic_input_instruction(state:&mut PhysicsState,data:&PhysicsData,ins:TimedI
 		},
 		Instruction::Mode(ModeInstruction::Restart(mode_id))=>{
 			//teleport to mode start zone
-			let mut spawn_point=vec3::ZERO;
+			let mut spawn_point=vec3::zero();
 			let mode=data.modes.get_mode(mode_id);
 			if let Some(mode)=mode{
 				// set style
@@ -1909,7 +1917,7 @@ fn atomic_input_instruction(state:&mut PhysicsState,data:&PhysicsData,ins:TimedI
 				}
 			}
 			set_position(spawn_point,&mut state.move_state,&mut state.body,&mut state.touching,&mut state.run,&mut state.mode_state,mode,&data.models,&data.hitbox_mesh,&data.bvh,&state.style,&state.camera,&state.input_state,state.time);
-			set_velocity(&mut state.body,&state.touching,&data.models,&data.hitbox_mesh,vec3::ZERO);
+			set_velocity(&mut state.body,&state.touching,&data.models,&data.hitbox_mesh,vec3::zero());
 			state.set_move_state(data,MoveState::Air);
 			b_refresh_walk_target=false;
 		}
@@ -1959,7 +1967,7 @@ mod test{
 	use strafesnet_common::integer::{vec3::{self,int as int3},mat3};
 	use super::*;
 	fn test_collision_axis_aligned(relative_body:Body,expected_collision_time:Option<Time>){
-		let h0=HitboxMesh::new(PhysicsMesh::unit_cube(),integer::Planar64Affine3::new(mat3::from_diagonal(int3(5,1,5)>>1),vec3::ZERO));
+		let h0=HitboxMesh::new(PhysicsMesh::unit_cube(),integer::Planar64Affine3::new(mat3::from_diagonal(int3(5,1,5)>>1),vec3::zero()));
 		let h1=StyleModifiers::roblox_bhop().calculate_mesh();
 		let hitbox_mesh=h1.transformed_mesh();
 		let platform_mesh=h0.transformed_mesh();
@@ -1975,7 +1983,7 @@ mod test{
 					int3(0,1,0)>>1,
 					int3(-1,0,5)>>1,
 				]),
-				vec3::ZERO
+				vec3::zero()
 			),
 		);
 		let h1=StyleModifiers::roblox_bhop().calculate_mesh();
@@ -1994,7 +2002,7 @@ mod test{
 		test_collision(Body::new(
 			int3(0,5,0),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)));
 	}
@@ -2003,7 +2011,7 @@ mod test{
 		test_collision(Body::new(
 			int3(0,5,0),
 			int3(0,-1,0)+(vec3::X>>32),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)));
 	}
@@ -2012,7 +2020,7 @@ mod test{
 		test_collision(Body::new(
 			int3(3,5,0),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)));
 	}
@@ -2021,7 +2029,7 @@ mod test{
 		test_collision(Body::new(
 			int3(0,5,3),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)));
 	}
@@ -2030,7 +2038,7 @@ mod test{
 		test_collision(Body::new(
 			int3(-3,5,0),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)));
 	}
@@ -2039,7 +2047,7 @@ mod test{
 		test_collision(Body::new(
 			int3(0,5,-3),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)));
 	}
@@ -2156,7 +2164,7 @@ mod test{
 		test_collision(Body::new(
 			int3(0,5,0),
 			int3(1,-64,2)>>6,// /64
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)));
 	}
@@ -2172,7 +2180,7 @@ mod test{
 	#[test]
 	fn already_inside_hit_nothing(){
 		test_collision(Body::new(
-			vec3::ZERO,
+			vec3::zero(),
 			int3(1,0,0),
 			int3(0,1,0),
 			Time::ZERO
@@ -2184,7 +2192,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			(int3(0,10,-7)>>1)+vec3::raw_xyz(0,0,1),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)))
 	}
@@ -2193,7 +2201,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			(int3(7,10,0)>>1)+vec3::raw_xyz(-1,0,0),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)))
 	}
@@ -2202,7 +2210,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			(int3(0,10,7)>>1)+vec3::raw_xyz(0,0,-1),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)))
 	}
@@ -2211,7 +2219,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			(int3(-7,10,0)>>1)+vec3::raw_xyz(1,0,0),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),Some(Time::from_secs(2)))
 	}
@@ -2221,7 +2229,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			int3(0,10,-7)>>1,
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),None)
 	}
@@ -2230,7 +2238,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			int3(7,10,0)>>1,
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),None)
 	}
@@ -2239,7 +2247,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			int3(0,10,7)>>1,
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),None)
 	}
@@ -2248,7 +2256,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			int3(-7,10,0)>>1,
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),None)
 	}
@@ -2258,7 +2266,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			(int3(0,10,-7)>>1)-vec3::raw_xyz(0,0,1),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),None)
 	}
@@ -2267,7 +2275,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			(int3(7,10,0)>>1)-vec3::raw_xyz(-1,0,0),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),None)
 	}
@@ -2276,7 +2284,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			(int3(0,10,7)>>1)-vec3::raw_xyz(0,0,-1),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),None)
 	}
@@ -2285,7 +2293,7 @@ mod test{
 		test_collision_axis_aligned(Body::new(
 			(int3(-7,10,0)>>1)-vec3::raw_xyz(1,0,0),
 			int3(0,-1,0),
-			vec3::ZERO,
+			vec3::zero(),
 			Time::ZERO
 		),None)
 	}

engine/physics/src/push_solve.rs

@@ -39,20 +39,18 @@ impl Contact{
 
 //note that this is horrible with fixed point arithmetic
 fn solve1(c0:&Contact)->Option<Ratio<Vector3<Fixed<3,96>>,Fixed<2,64>>>{
-	const EPSILON:Fixed<2,64>=Fixed::from_bits(Fixed::<2,64>::ONE.to_bits().shr(10));
 	let det=c0.normal.dot(c0.velocity);
-	if det.abs()<EPSILON{
+	if det.abs()==Fixed::ZERO{
 		return None;
 	}
 	let d0=c0.normal.dot(c0.position);
 	Some(c0.normal*d0/det)
 }
 fn solve2(c0:&Contact,c1:&Contact)->Option<Ratio<Vector3<Fixed<5,160>>,Fixed<4,128>>>{
-	const EPSILON:Fixed<4,128>=Fixed::from_bits(Fixed::<4,128>::ONE.to_bits().shr(10));
 	let u0_u1=c0.velocity.cross(c1.velocity);
 	let n0_n1=c0.normal.cross(c1.normal);
 	let det=u0_u1.dot(n0_n1);
-	if det.abs()<EPSILON{
+	if det.abs()==Fixed::ZERO{
 		return None;
 	}
 	let d0=c0.normal.dot(c0.position);
@@ -60,10 +58,9 @@ fn solve2(c0:&Contact,c1:&Contact)->Option<Ratio<Vector3<Fixed<5,160>>,Fixed<4,1
 	Some((c1.normal.cross(u0_u1)*d0+u0_u1.cross(c0.normal)*d1)/det)
 }
 fn solve3(c0:&Contact,c1:&Contact,c2:&Contact)->Option<Ratio<Vector3<Fixed<4,128>>,Fixed<3,96>>>{
-	const EPSILON:Fixed<3,96>=Fixed::from_bits(Fixed::<3,96>::ONE.to_bits().shr(10));
 	let n0_n1=c0.normal.cross(c1.normal);
 	let det=c2.normal.dot(n0_n1);
-	if det.abs()<EPSILON{
+	if det.abs()==Fixed::ZERO{
 		return None;
 	}
 	let d0=c0.normal.dot(c0.position);
@@ -149,7 +146,7 @@ fn is_space_enclosed_4(
 }
 
 const fn get_push_ray_0(point:Planar64Vec3)->Ray{
-	Ray{origin:point,direction:vec3::ZERO}
+	Ray{origin:point,direction:vec3::zero()}
 }
 fn get_push_ray_1(point:Planar64Vec3,c0:&Contact)->Option<Ray>{
 	//wrap for speed
@@ -321,13 +318,13 @@ mod tests{
 	fn test_push_solve(){
 		let contacts=vec![
 			Contact{
-				position:vec3::ZERO,
+				position:vec3::zero(),
 				velocity:vec3::Y,
 				normal:vec3::Y,
 			}
 		];
 		assert_eq!(
-			vec3::ZERO,
+			vec3::zero(),
 			push_solve(&contacts,vec3::NEG_Y)
 		);
 	}

integration-testing/src/test_scenes.rs

@@ -77,7 +77,7 @@ fn simultaneous_collision(){
 		Time::ZERO,
 	);
 	let mut physics=PhysicsState::new_with_body(body);
-	physics.style_mut().gravity=vec3::ZERO;
+	physics.style_mut().gravity=vec3::zero();
 	let mut phys_iter=PhysicsContext::iter_internal(&mut physics,&physics_data,Time::from_secs(2))
 		.filter(|ins|!matches!(ins.instruction,InternalInstruction::StrafeTick));
 	// the order that they hit does matter, but we aren't currently worrying about that.
@@ -101,7 +101,7 @@ fn bug_3(){
 		Time::ZERO,
 	);
 	let mut physics=PhysicsState::new_with_body(body);
-	physics.style_mut().gravity=vec3::ZERO;
+	physics.style_mut().gravity=vec3::zero();
 	let mut phys_iter=PhysicsContext::iter_internal(&mut physics,&physics_data,Time::from_secs(3))
 		.filter(|ins|!matches!(ins.instruction,InternalInstruction::StrafeTick));
 	// touch side of part at 0,0,0

lib/bsp_loader/src/brush.rs

@@ -210,7 +210,7 @@ pub fn faces_to_mesh(faces:Vec<Vec<integer::Planar64Vec3>>)->model::Mesh{
 	let color=mb.acquire_color_id(glam::Vec4::ONE);
 	let tex=mb.acquire_tex_id(glam::Vec2::ZERO);
 	// normals are ignored by physics
-	let normal=mb.acquire_normal_id(integer::vec3::ZERO);
+	let normal=mb.acquire_normal_id(integer::vec3::zero());
 
 	let polygon_list=faces.into_iter().map(|face|{
 		face.into_iter().map(|pos|{

lib/bsp_loader/src/bsp.rs

@@ -105,7 +105,7 @@ pub fn convert<'a>(
 					water:Some(attr::IntersectingWater{
 						viscosity:integer::Planar64::ONE,
 						density:integer::Planar64::ONE,
-						velocity:integer::vec3::ZERO,
+						velocity:integer::vec3::zero(),
 					}),
 				},
 				general:attr::GeneralAttributes::default(),
@@ -295,7 +295,7 @@ pub fn convert<'a>(
 					attributes,
 					transform:integer::Planar64Affine3::new(
 						integer::mat3::identity(),
-						integer::vec3::ZERO,
+						integer::vec3::zero(),
 					),
 					color:glam::Vec4::ONE,
 				});

lib/common/src/gameplay_style.rs

@@ -319,7 +319,7 @@ impl WalkSettings{
 		self.accelerate.accel.min((-gravity.y*friction).clamp_1())
 	}
 	pub fn get_walk_target_velocity(&self,control_dir:Planar64Vec3,normal:Planar64Vec3)->Planar64Vec3{
-		if control_dir==crate::integer::vec3::ZERO{
+		if control_dir==crate::integer::vec3::zero(){
 			return control_dir;
 		}
 		let nn=normal.length_squared();
@@ -329,13 +329,13 @@ impl WalkSettings{
 		let dd=d*d;
 		if dd<nnmm{
 			let cr=normal.cross(control_dir);
-			if cr==crate::integer::vec3::ZERO_2{
-				crate::integer::vec3::ZERO
+			if cr==crate::integer::vec3::zero(){
+				crate::integer::vec3::zero()
 			}else{
 				(cr.cross(normal)*self.accelerate.topspeed/((nn*(nnmm-dd)).sqrt())).divide().clamp_1()
 			}
 		}else{
-			crate::integer::vec3::ZERO
+			crate::integer::vec3::zero()
 		}
 	}
 	pub fn is_slope_walkable(&self,normal:Planar64Vec3,up:Planar64Vec3)->bool{
@@ -360,7 +360,7 @@ impl LadderSettings{
 		self.accelerate.accel
 	}
 	pub fn get_ladder_target_velocity(&self,mut control_dir:Planar64Vec3,normal:Planar64Vec3)->Planar64Vec3{
-		if control_dir==crate::integer::vec3::ZERO{
+		if control_dir==crate::integer::vec3::zero(){
 			return control_dir;
 		}
 		let nn=normal.length_squared();
@@ -382,13 +382,13 @@ impl LadderSettings{
 		//- fix the underlying issue
 		if dd<nnmm{
 			let cr=normal.cross(control_dir);
-			if cr==crate::integer::vec3::ZERO_2{
-				crate::integer::vec3::ZERO
+			if cr==crate::integer::vec3::zero(){
+				crate::integer::vec3::zero()
 			}else{
 				(cr.cross(normal)*self.accelerate.topspeed/((nn*(nnmm-dd)).sqrt())).divide().clamp_1()
 			}
 		}else{
-			crate::integer::vec3::ZERO
+			crate::integer::vec3::zero()
 		}
 	}
 }

lib/common/src/integer.rs

@@ -561,12 +561,6 @@ pub mod vec3{
 	pub use linear_ops::types::Vector3;
 	pub const MIN:Planar64Vec3=Planar64Vec3::new([Planar64::MIN;3]);
 	pub const MAX:Planar64Vec3=Planar64Vec3::new([Planar64::MAX;3]);
-	pub const ZERO:Planar64Vec3=Planar64Vec3::new([Planar64::ZERO;3]);
-	pub const ZERO_2:Vector3<Fixed::<2,64>>=Vector3::new([Fixed::<2,64>::ZERO;3]);
-	pub const ZERO_3:Vector3<Fixed::<3,96>>=Vector3::new([Fixed::<3,96>::ZERO;3]);
-	pub const ZERO_4:Vector3<Fixed::<4,128>>=Vector3::new([Fixed::<4,128>::ZERO;3]);
-	pub const ZERO_5:Vector3<Fixed::<5,160>>=Vector3::new([Fixed::<5,160>::ZERO;3]);
-	pub const ZERO_6:Vector3<Fixed::<6,192>>=Vector3::new([Fixed::<6,192>::ZERO;3]);
 	pub const X:Planar64Vec3=Planar64Vec3::new([Planar64::ONE,Planar64::ZERO,Planar64::ZERO]);
 	pub const Y:Planar64Vec3=Planar64Vec3::new([Planar64::ZERO,Planar64::ONE,Planar64::ZERO]);
 	pub const Z:Planar64Vec3=Planar64Vec3::new([Planar64::ZERO,Planar64::ZERO,Planar64::ONE]);
@@ -575,6 +569,10 @@ pub mod vec3{
 	pub const NEG_Y:Planar64Vec3=Planar64Vec3::new([Planar64::ZERO,Planar64::NEG_ONE,Planar64::ZERO]);
 	pub const NEG_Z:Planar64Vec3=Planar64Vec3::new([Planar64::ZERO,Planar64::ZERO,Planar64::NEG_ONE]);
 	pub const NEG_ONE:Planar64Vec3=Planar64Vec3::new([Planar64::NEG_ONE,Planar64::NEG_ONE,Planar64::NEG_ONE]);
+	// TODO: use #![feature(generic_const_items)] when stabilized https://github.com/rust-lang/rust/issues/113521
+	pub const fn zero<const N:usize,const F:usize>()->Vector3<Fixed<N,F>>{
+		Vector3::new([Fixed::ZERO;3])
+	}
 	#[inline]
 	pub const fn int(x:i32,y:i32,z:i32)->Planar64Vec3{
 		Planar64Vec3::new([Planar64::raw((x as i64)<<32),Planar64::raw((y as i64)<<32),Planar64::raw((z as i64)<<32)])
@@ -663,7 +661,7 @@ pub struct Planar64Affine3{
 	pub translation:Planar64Vec3,
 }
 impl Planar64Affine3{
-	pub const IDENTITY:Self=Self::new(mat3::identity(),vec3::ZERO);
+	pub const IDENTITY:Self=Self::new(mat3::identity(),vec3::zero());
 	#[inline]
 	pub const fn new(matrix3:Planar64Mat3,translation:Planar64Vec3)->Self{
 		Self{matrix3,translation}

lib/fixed_wide/src/fixed.rs

@@ -70,6 +70,34 @@ impl<const N:usize,const F:usize> Fixed<N,F>{
 	pub const fn midpoint(self,other:Self)->Self{
 		Self::from_bits(self.bits.midpoint(other.bits))
 	}
+	#[inline]
+	pub const fn min(self,other:Self)->Self{
+		Self::from_bits(self.bits.min(other.bits))
+	}
+	#[inline]
+	pub const fn max(self,other:Self)->Self{
+		Self::from_bits(self.bits.max(other.bits))
+	}
+	/// return the result of self*sign(other)
+	#[inline]
+	pub const fn mul_sign<const N1:usize,const F1:usize>(self,other:Fixed<N1,F1>)->Self{
+		if other.is_negative(){
+			Self::from_bits(self.bits.neg())
+		}else if other.is_zero(){
+			Fixed::ZERO
+		}else{
+			self
+		}
+	}
+	/// return the result of self/sign(other) (divide by zero does not change the sign)
+	#[inline]
+	pub const fn div_sign<const N1:usize,const F1:usize>(self,other:Fixed<N1,F1>)->Self{
+		if other.is_negative(){
+			Self::from_bits(self.bits.neg())
+		}else{
+			self
+		}
+	}
 }
 impl<const F:usize> Fixed<1,F>{
 	/// My old code called this function everywhere so let's provide it
@@ -338,7 +366,7 @@ impl_additive_operator!( Fixed, BitXor, bitxor, Self );
 // non-wide operators.  The result is the same width as the inputs.
 
 // This macro is not used in the default configuration.
-#[allow(unused_macros)]
+#[expect(unused_macros)]
 macro_rules! impl_multiplicative_operator_not_const_generic {
 	( ($struct: ident, $trait: ident, $method: ident, $output: ty ), $width:expr ) => {
 		impl<const F:usize> core::ops::$trait for $struct<$width,F>{
@@ -517,7 +545,7 @@ impl_shift_operator!( Fixed, Shr, shr, Self );
 
 // wide operators.  The result width is the sum of the input widths, i.e. none of the multiplication
 
-#[allow(unused_macros)]
+#[expect(unused_macros)]
 macro_rules! impl_wide_operators{
 	($lhs:expr,$rhs:expr)=>{
 		impl core::ops::Mul<Fixed<$rhs,{$rhs*32}>> for Fixed<$lhs,{$lhs*32}>{

lib/rbx_loader/Cargo.toml

@@ -13,16 +13,16 @@ authors = ["Rhys Lloyd <krakow20@gmail.com>"]
 bytemuck = "1.14.3"
 glam = "0.30.0"
 regex = { version = "1.11.3", default-features = false }
-rbx_binary = { version = "1.0.1-sn5", registry = "strafesnet" }
-rbx_dom_weak =  { version = "3.0.1-sn5", registry = "strafesnet" }
 rbx_mesh = "0.5.0"
-rbx_reflection = "5.0.0"
-rbx_reflection_database = "1.0.0"
-rbx_xml = { version = "1.0.1-sn5", registry = "strafesnet" }
 rbxassetid = { version = "0.1.0", path = "../rbxassetid", registry = "strafesnet" }
 roblox_emulator = { version = "0.5.1", path = "../roblox_emulator", default-features = false, registry = "strafesnet" }
 strafesnet_common = { version = "0.7.0", path = "../common", registry = "strafesnet" }
 strafesnet_deferred_loader = { version = "0.5.1", path = "../deferred_loader", registry = "strafesnet" }
+rbx_binary = "2.0.1"
+rbx_dom_weak = "4.1.0"
+rbx_reflection = "6.1.0"
+rbx_reflection_database = "2.0.2"
+rbx_xml = "2.0.1"
 
 [lints]
 workspace = true

lib/rbx_loader/src/rbx.rs

@@ -251,7 +251,7 @@ fn get_attributes(name:&str,can_collide:bool,velocity:Planar64Vec3,model_id:mode
 		}
 	}
 	//need some way to skip this
-	if allow_booster&&velocity!=vec3::ZERO{
+	if allow_booster&&velocity!=vec3::zero(){
 		general.booster=Some(attr::Booster::Velocity(velocity));
 	}
 	Ok(match force_can_collide{
@@ -559,7 +559,7 @@ pub fn convert<'a>(
 	//just going to leave it like this for now instead of reworking the data structures for this whole thing
 	let textureless_render_group=render_config_deferred_loader.acquire_render_config_id(None);
 
-	let db=rbx_reflection_database::get();
+	let db=rbx_reflection_database::get().unwrap();
 	let basepart=&db.classes["BasePart"];
 	let baseparts=dom.descendants().filter(|&instance|
 		db.classes.get(instance.class.as_str()).is_some_and(|class|

lib/rbx_loader/src/union.rs

@@ -250,7 +250,7 @@ pub fn convert(
 		// generate a unit cube as default physics
 		let pos_list=CUBE_DEFAULT_VERTICES.map(|pos|mb.acquire_pos_id(pos>>1));
 		let tex=mb.acquire_tex_id(glam::Vec2::ZERO);
-		let normal=mb.acquire_normal_id(vec3::ZERO);
+		let normal=mb.acquire_normal_id(vec3::zero());
 		let color=mb.acquire_color_id(glam::Vec4::ONE);
 		let polygon_group=PolygonGroup::PolygonList(PolygonList::new(CUBE_DEFAULT_POLYS.map(|poly|poly.map(|[pos_id,_]|
 			mb.acquire_vertex_id(IndexedVertex{pos:pos_list[pos_id as usize],tex,normal,color})

lib/roblox_emulator/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "roblox_emulator"
-version = "0.5.1"
+version = "0.5.2"
 edition = "2024"
 repository = "https://git.itzana.me/StrafesNET/strafe-project"
 license = "MIT OR Apache-2.0"
@@ -15,10 +15,10 @@ run-service=[]
 glam = "0.30.0"
 mlua = { version = "0.11.3", features = ["luau"] }
 phf = { version = "0.13.1", features = ["macros"] }
-rbx_dom_weak = { version = "3.0.1-sn5", registry = "strafesnet" }
-rbx_reflection = "5.0.0"
-rbx_reflection_database = "1.0.0"
-rbx_types = "2.0.0"
+rbx_dom_weak = "4.1.0"
+rbx_reflection = "6.1.0"
+rbx_reflection_database = "2.0.2"
+rbx_types = "3.1.0"
 
 [lints]
 workspace = true

lib/roblox_emulator/src/context.rs

@@ -52,7 +52,7 @@ impl Context{
 	}
 	/// Creates an iterator over all items of a particular class.
 	pub fn superclass_iter<'a>(&'a self,superclass:&'a str)->impl Iterator<Item=Ref>+'a{
-		let db=rbx_reflection_database::get();
+		let db=rbx_reflection_database::get().unwrap();
 		let Some(superclass)=db.classes.get(superclass)else{
 			panic!("Invalid class");
 		};

lib/roblox_emulator/src/runner/enum.rs

@@ -37,7 +37,7 @@ impl PartialEq for EnumItem<'_>{
 pub struct Enums;
 impl Enums{
 	pub fn get(&self,index:&str)->Option<EnumItems<'static>>{
-		let db=rbx_reflection_database::get();
+		let db=rbx_reflection_database::get().unwrap();
 		db.enums.get(index).map(|ed|EnumItems{ed})
 	}
 }

lib/roblox_emulator/src/runner/instance/instance.rs

@@ -37,7 +37,7 @@ pub fn dom_mut<T>(lua:&mlua::Lua,mut f:impl FnMut(&mut WeakDom)->mlua::Result<T>
 }
 
 pub fn class_is_a(class:&str,superclass:&str)->bool{
-	let db=rbx_reflection_database::get();
+	let db=rbx_reflection_database::get().unwrap();
 	let (Some(class),Some(superclass))=(db.classes.get(class),db.classes.get(superclass))else{
 		return false;
 	};
@@ -80,14 +80,14 @@ pub fn find_first_descendant_of_class<'a>(dom:&'a WeakDom,instance:&rbx_dom_weak
 }
 
 pub fn find_first_child_which_is_a<'a>(dom:&'a WeakDom,instance:&rbx_dom_weak::Instance,superclass:&str)->Option<&'a rbx_dom_weak::Instance>{
-	let db=rbx_reflection_database::get();
+	let db=rbx_reflection_database::get().unwrap();
 	let superclass_descriptor=db.classes.get(superclass)?;
 	instance.children().iter().filter_map(|&r|dom.get_by_ref(r)).find(|inst|{
 		db.classes.get(inst.class.as_str()).is_some_and(|descriptor|db.has_superclass(descriptor,superclass_descriptor))
 	})
 }
 pub fn find_first_descendant_which_is_a<'a>(dom:&'a WeakDom,instance:&rbx_dom_weak::Instance,superclass:&str)->Option<&'a rbx_dom_weak::Instance>{
-	let db=rbx_reflection_database::get();
+	let db=rbx_reflection_database::get().unwrap();
 	let superclass_descriptor=db.classes.get(superclass)?;
 	dom.descendants_of(instance.referent()).find(|inst|{
 		db.classes.get(inst.class.as_str()).is_some_and(|descriptor|db.has_superclass(descriptor,superclass_descriptor))
@@ -282,7 +282,7 @@ impl mlua::UserData for Instance{
 			dom_mut(lua,|dom|{
 				let instance=this.get(dom)?;
 				//println!("__index t={} i={index:?}",instance.name);
-				let db=rbx_reflection_database::get();
+				let db=rbx_reflection_database::get().unwrap();
 				let class=db.classes.get(instance.class.as_str()).ok_or_else(||mlua::Error::runtime("Class missing"))?;
 				// Find existing property
 				// Interestingly, ustr can know ahead of time if
@@ -344,7 +344,7 @@ impl mlua::UserData for Instance{
 			let index_str=&*index.to_str()?;
 			dom_mut(lua,|dom|{
 				let instance=this.get_mut(dom)?;
-				let db=rbx_reflection_database::get();
+				let db=rbx_reflection_database::get().unwrap();
 				let class=db.classes.get(instance.class.as_str()).ok_or_else(||mlua::Error::runtime("Class missing"))?;
 				let property=db.superclasses_iter(class).find_map(|cls|
 					cls.properties.get(index_str)

map-tool/Cargo.toml

@@ -13,10 +13,10 @@ futures = "0.3.31"
 image = "0.25.2"
 image_dds = "0.7.1"
 rbx_asset = { version = "0.5.0", registry = "strafesnet" }
-rbx_binary  = { version = "1.0.1-sn5", registry = "strafesnet" }
-rbx_dom_weak =  { version = "3.0.1-sn5", registry = "strafesnet" }
-rbx_reflection_database = "1.0.0"
-rbx_xml = { version = "1.0.1-sn5", registry = "strafesnet" }
+rbx_binary = "2.0.1"
+rbx_dom_weak = "4.1.0"
+rbx_reflection_database = "2.0.2"
+rbx_xml = "2.0.1"
 rbxassetid = { version = "0.1.0", registry = "strafesnet" }
 strafesnet_bsp_loader = { version = "0.3.1", path = "../lib/bsp_loader", registry = "strafesnet" }
 strafesnet_deferred_loader = { version = "0.5.1", path = "../lib/deferred_loader", registry = "strafesnet" }